North America / English Change

 

Drip Line and Accessories

Distribute treated effluent effectively into tough soils

 
 
Features andBenefits
TechnicalData
Literature and Documents

Clarus Environmental’s subsurface drip distribution equipment provides one of the most efficient and cost effective ways to turn a poor-soil site into usable property.  Pressurized drip tubing is installed 6"-12" deep in the most biologically active zone of the soil. This shallow placement helps to overcome limiting site characteristics such as high water tables or tight soils.  The drip system disperses effluent below the ground surface through 1/2" flexible tubing. Emitters in the drip line are spaced every 2'.   Individual drip lines are typically installed on 2' centers. The end result is even wastewater distribution, leading to better effluent treatment with less chance of soil clogging.

  • Installation requires minimal site disturbance

  • Flexible installation can be adapted to most sites

  • Natural landscaping can be maintained

  • Ideal for steep slopes, uneven terrain, and rocky soils

Notes

All Clarus Environmental products must be installed and maintained in accordance with all applicable codes.

 

Part Number Chart

Part Number Chart
Drip Line & Accessories
Part Number Description
5056-0001 500' Roll of .5" dia polyethylene tubing, 0.53 gpm
5056-0002 .75" Spigot x .5" tubing adapter
5056-0003 .5" Tubing x .6" tubing coupling
5056-0004 90° Elbow fitting for .5" tubing
5056-0005 1" Air relief valve, MPT
5056-0006 6" Dia round valve box
5056-0007 90° Elbow, 1.25" slip x 1" FPT, Sch 40
5056-0008 90° Elbow, 1.5" slip x 1" FPT, Sch 40
5056-0011 1" Autoflush filter system (up to 30 gpm), residential
5056-0012 1" FIPT solenoid valve
5056-0013 1.5" FIPT solenoid valve
5056-0014 2" FIPT solenoid valve
5056-0024 .5" Dia flexible PVC pipe
5056-0025 2" Autoflush filter system (30-180 gpm), commercial
5056-0026 2" Air relief valve, FPT
5056-0030 10" Dia round valve box (for use with 5056-0025)
5056-0031 Victaulic hardware pak
5056-0032 .5" x 500' Drip line roll w/ 24" emitters (min 21 req'd)
5056-0034 Tee, 1.25" slip x 1.25" slip x .5" slip, Sch 40
5056-0035 Tee, 1.5" slip x 1.5" slip , .5" slip, Sch 40
5056-0044 .4" Tubing x .5" tubing tee
10-1470 Control panel, dup, 115/230V, 0-20A, TD autoflushing (for use with 5056-0011)
10-1523 Control panel, sim, 115/230V, 0-20A, TD autoflushing (for use with 5056-0011)
×

Dimensional Data Drawings

 

×

 

×